Version for Euromechanics

The MORS6-CPCI serial module was made in the “Euromechanics 3U” construct, which resulted in a higher degree of vibration resistance, a more reliable PCI bus connector.

Radar compatibility

The radar processor allows you to mate without additional devices with a wide range of domestic and foreign radar. Digital inputs are optocoupler.

Hardware Signal Processing

The signal from the radar is digitized at 66 MHz and subjected to preliminary intra-beam and inter-beam filtering, target selection. After that, the data stream is reduced to display or send over the network. The processor can automatically change the processing modes in different sectors of the review, as well as change the radar modes.

Applications

• Construction of mobile radar systems
• Modernization of old radars for transmitting radar images over Ethernet, TCP / IP networks
• Bridge navigation systems
• Shore indicator posts
• Archiving systems of primary radar information

   

Application Support

The radar server is supported by a line of software products developed and supplied by Marine Complexes and Systems Plus LLC.

Basic technical specifications

System Features:

• 33 MHz CPCI bus operating frequency
• Cpci bus width is 32 bits
• PCI bus mastering bandwidth - up to 50 MB / s
• DSP frequency - 200 MHz
• The processing frequency in the FPGA is 83 MHz

   

Radar Processor:

• ADC Parameters: 10 bits, up to 80 MHz, 2 channels
• Pairing with any digital angle sensors, parallel code up to 13 bits
• Intra-beam and inter-beam digital filtering
• Analog gain profile in range (TAG)
• Issuing commands synchronously with the rotation of the antenna (blocking radiation, etc.)
• Hardware selection of targets from primary radar information
• Primary RLI packaging of 8.4.2 bits
• Hardware control of input signals

Interfaces:

• 1 BNC: Analog ADC Inputs
• 1 SMA: analog ADC input
• 1 BNC: radiation trigger pulse
• 7 digital inputs from opto-decoupling radar
• 8 digital TTL radar control outputs

Radar signal parameters:

• Input range for video signal: 0.5-8V
• Optocouplers input range: 2-24V
• Antenna rotation speed: up to 60 rpm
• Starting pulse repetition rate: up to 5KHz
• Video capture rate: 66MHz

   

Other:

• Compatible with operating system: QNX 4.25, QNX 6.0
• Powered by CPCI bus only
• Industrial temperature range (-40 ... +85)
• Relative humidity up to 98% at 30 ° C
• Dimensions 3U 4HP